Box Type Ambulance

Bristol

CONSTRUCTION:

  • The bodywork will be based on a sub frame fixed to the chassis according to the regulations of chassis manufacturers.
  • The body structure will be made using aluminium box sections 3mm thickness.
  • External panels will be aluminum sheets 3mm thickness
  • the floor in marine grade plywood covered with good quality vinyl.
  • The inside sides of the patient compartment are insulated with glass wool and then finished with composite aluminium sheets 3mm thickness
  • Step at the rear bumper on the back door.
  • One sliding window with frosty effect sticker on the bulkhead.
  • The rear door will be twin leaf, swing out the type and equipped with lock and windows.
  • The height of the box will be as minimum as possible to prevent the wind effectively
  • One warn-made in USA 8000 lbs. Winch at front with 25m rope
  • One manual awning on the right hand side

CHASSIS SPECIFICATIONS:

  • Engine: 4 liters, V6 petrol engine, 228hp / 5200rpm
  • Transmission: 5 speed manual
  • Wheel base: 3180mm
  • Front air condition
  • Airbag for driver + co-driver.
  • Seating capacity: 3 people
  • Tilt able steering
  • Power windows
  • Power door lock
  • ABS + VSC + BA + EBD + HAC + ATRC
  • Powered outside mirrors
  • Front bench type seat
  • Drive: 4 wheel drive
  • AM/ FM radio with C player & speakers
  • Tires: 285/75 R16
  • 16-Inch alloy wheels
  • Front suspension: rigid axle coil
  • Rear suspension: rigid axle leaf
  • Fuel tank: 90 + 90 liters (dual)
  • GVW: 3200 kg
  • Differential lock
  • Rear view camera
  • GPS system
  • One snorkel on the right hand side
  • Two nos. Heavy duty tow hook at front bumper

PATIENT COMPARTMENT:

  • An attendant seat on the bulkhead with 3 points retractable seatbelt and easy to clean upholstery.
  • Overhead medical cabinets made from intecel sheets with sliding doors.
  • Squad bench with upholstery on the right-hand side, with storage area underneath (to store foldable stretcher and ‘M’ size cylinder), backrest and 3 points retractable seat belt for each person.
  • Post and wheel cups to accommodate an emergency stretcher above squad bench & with belts to secure emergency stretcher on squad bench.
  • 2 x overhead safety grab rail on the ceiling and 1 x roof suspended IV hooks.
  • 2 nos. grab handlebar short type.
  • Rear windows on the rear doors to be provided with frosty effect sticker for privacy in the patient compartment.
  • Intercom will be provided in the patient compartment for communication between driver cabin and patient compartment.
  • One no. of glove box holder will be provided on the left hand side of the wall above control panel.
  • One no. of 2 kg. Fire extinguisher will be provided.
  • One no. of waste bin will be provided
  • Two nos. of sharp container (1 liter each) will be provided

ELECTRICAL PACKAGE:

  • 2 x 12V socket
  • 2 x 230V Double Socket with built in USB port
  • 6 x LED Roof lights with trauma modes in patient’s compartment provided with 2 control switches
  • 1 x reading light.
  • 1 x ventilation fan ( intake + outtake )
  • Two 230V / 50 Hz shorelines (NOT auto eject type) with 10m cable & plugs, one to charge the battery and the other one to operate the 230 V A/C from external power supply (city electricity )( in another way the shoreline line will be use to connect the A/C power to 230V external electrical supply only if the vehicle in parking position and will NOT be possible to operate the A/C from the inverter)
  • One 230 V /1500 watt inverter made in USA / battery charger with additional battery AC Delco
  • One reverse alarm
  • Ambulance connects the switch in drivers console to activate and deactivate the conversion ’s electrical system
  • All electrical controls will be arranged in 2 ergonomically designed switch panels located in patient and driver cabin.
  • Grill protection on vehicle front and rear lights
  • One rechargeable portable search light
  • Wiring , power source and space for radio will be provided

  • AIR CONDITION:
  • Installation of rear A/C system and rear evaporator (free blow) driven by original vehicle compressor .
  • 230 V roof mounted with inbuilt compressor A/C powered by external power supply Via 230 shoreline only. (NOT by inverter) (will NOT be possible to operate the 230 V A/C when the vehicle in driving position)

MEDICAL EQUIPMENT & WARNING LIGHTS:

  • Oxygen cylinder mounted on sliding mechanism under the squad bench with 2nos. UK standard outlets 1no. on each Left & right hand side walls
  • Single stage regulator including Schrader, maximum flow rate 50 l/min
  • Single flow meter w/fixed Probe O2 High flow 0 - 15 lpm
  • Humidifier - disposable
  • Adult mask inc. 1.8m tube
  • LED Light Bar on cabin roof (Blue - Blue) 48” long
  • Electronic siren 100 W with PA amplifier and speaker
  • LED Blue warning light on the front grill
  • LED warning lights two on each side and two at the rear side and two at front
  • White scene lights one on each side and one at the rear
  • One spot light at rear
  • One rotatEable spot light on manually rotateable pneumatic extendable mast at rear
  • Stretcher Stryker M1
  • 1 x First Aid Kit

PAINT & SIGN WRITING:

  • White color
  • Stripes on both sides.(color to be agreed)
  • Reverse “Ambulance” writing on front bonnet
  • Crescent sign on rear window.(color to be agreed)
  • “3M” reflective stickers to be used

OPERATION & SERVICE MANUALS:

  • One set of original operation and service manual for equipment

WARRANTY:

TWO YEARS FOR FROM THE DATE OF SUPPLY:
  • Two years warranty for Rear body compartment
  • Two years warranty for all equipment (supplied by Bristol )

RIGHT SIDE DISCHARGE:

  • Foam Discharges, (2)2.5
  • Foam Discharge, 3”, RH
  • Foam Discharge, 6”, RH

Get a Quote / Need a Help ? Contact Us